Anope 1.7.15.1156 - OperServ
    catalan . german . english . spanish . french . greek . hungarian . italian . dutch . polish . portuguese . russian . turkish

    | NickServ | ChanServ | OperServ | MemoServ | HostServ | BotServ |

    • HELP
       OperServ commands:
      
      
    • GLOBAL
       Syntax: /msg OperServ  GLOBAL message
       
       Allows IRCops to send messages to all users on the network.
       The message will be sent from the nick OperServ.
      
      
    • STATS
       Syntax: /msg OperServ  STATS [AKILL | ALL | RESET | MEMORY | UPLINK]
       
       Without any option, shows the current number of users and
       IRCops online (excluding Services), the highest number of
       users online since Services was started, and the length of
       time Services has been running.
       
       With the AKILL option, displays the current size of the
       AKILL list and the current default expiry time.
       
       The RESET option currently resets the maximum user count
       to the number of users currently present on the network.
       
       The MEMORY option displays information on the memory
       usage of Services. Using this option can freeze Services for
       a short period of time on large networks; don't overuse it!
       
       The UPLINK option displays information about the current
       server Anope uses as an uplink to the network.
       
       The ALL displays the user and uptime statistics, and
       everything you'd see with MEMORY and UPLINK options.
       
       UPTIME may be used as a synonym for STATS.
      
      
    • OPER
       Syntax: /msg OperServ  OPER ADD nick
               OPER DEL {nick | entry-num | list}
               OPER LIST [mask | list]
               OPER CLEAR
       
       Allows the Services admins to add or remove nicknames
       to or from the Services operator list.  A user whose nickname
       is on the Services operator list and who has identified to
       OperServ will be able to access Services operator commands.
       
       The OPER ADD command adds the given nickname to the
       Services operator list.
       
       The OPER DEL command removes the given nick from the
       Services operator list.  If a list of entry numbers is given, 
       those entries are deleted.  (See the example for LIST below.)
       
       The OPER LIST command displays the Services operator list.  
       If a wildcard mask is given, only those entries matching the
       mask are displayed.  If a list of entry numbers is given,
       only those entries are shown; for example:
      
          OPER LIST 2-5,7-9
             Lists Services operator entries numbered 2 through 
             5 and 7 through 9.
             
       The OPER CLEAR command clears all entries of the
       Services operator list.
       
       Any IRC operator may use the OPER LIST form of the command.
       All other use limited to Services admins.
      
      
    • ADMIN
       Syntax: /msg OperServ  ADMIN ADD nick
               ADMIN DEL {nick | entry-num | list}
               ADMIN LIST [mask | list]
               ADMIN CLEAR
       
       Allows the Services root to add or remove nicknames
       to or from the Services admin list.  A user whose nickname
       is on the Services admin list and who has identified to
       OperServ will be able to access Services admin commands.
       
       The ADMIN ADD command adds the given nickname to the
       Services admin list.
       
       The ADMIN DEL command removes the given nick from the
       Services admin list.  If a list of entry numbers is given,
       those entries are deleted.  (See the example for LIST below.)
       
       The ADMIN LIST command displays the Services admin list.  
       If a wildcard mask is given, only those entries matching the
       mask are displayed.  If a list of entry numbers is given,
       only those entries are shown; for example:
      
          ADMIN LIST 2-5,7-9
             Lists Services admin entries numbered 2 through 
             5 and 7 through 9.
             
       The ADMIN CLEAR command clears all entries of the
       Services admin list.
       
       Any IRC operator may use the ADMIN LIST form of the command.
       All other use limited to Services root.
      
      
    • IGNORE
       Syntax: /msg OperServ  IGNORE {ADD|DEL|LIST|CLEAR} [time] [nick]
      
       Allows Services Admins to make Services ignore a nick for a
       certain time or until the next restart. The default time
       format is seconds. You can specify it by using units. Valid
       units are: s for seconds, m for minutes, h for hours and
       d for days. Combinations of these units are not permitted. To 
       make Services permanently ignore the user type 0 as time.
      
      
    • MODE
       Syntax: /msg OperServ  MODE channel modes
       
       Allows Services operators to set channel modes for any
       channel.  Parameters are the same as for the standard /MODE
       command.
       
       Limited to Services operators.
      
      
    • UMODE
       Syntax: /msg OperServ  UMODE user modes
       
       Allows Services admins to set user modes for any user.
       Parameters are the same as for the standard /MODE
       command.
       
       Limited to Super admins.
      
      
    • OLINE
       Syntax: /msg OperServ  OLINE user flags
       
       Allows Services admins to give Operflags to any user.
       Flags have to be prefixed with a "+" or a "-". To
       remove all flags simply type a "-" instead of any flags.
      
       Limited to Super admins.
      
      
    • CLEARMODES
       Syntax: /msg OperServ  CLEARMODES channel [ALL]
       
       Clears all binary modes (i,k,l,m,n,p,s,t) and bans from a
       channel.  If ALL is given, also clears all ops and
       voices (+o and +v modes) from the channel.
       
       Limited to Services operators.
      
      
    • KICK
       Syntax: /msg OperServ  KICK channel user reason
       
       Allows IRCops to kick a user from any channel.
       Parameters are the same as for the standard /KICK
       command.  The kick message will have the nickname of the
       IRCop sending the KICK command prepended; for example:
       
       *** SpamMan has been kicked off channel #my_channel by OperServ (Alcan (Flood))
       
       Limited to Services operators.
      
      
    • AKILL
       Syntax: /msg OperServ  AKILL ADD [+expiry] mask reason
               AKILL DEL {mask | entry-num | list}
               AKILL LIST [mask | list]
               AKILL VIEW [mask | list]
               AKILL CLEAR
       
       Allows Services operators to manipulate the AKILL list.  If
       a user matching an AKILL mask attempts to connect, Services
       will issue a KILL for that user and, on supported server
       types, will instruct all servers to add a ban (K-line) for
       the mask which the user matched.
       
       AKILL ADD adds the given user@host/ip mask to the AKILL
       list for the given reason (which must be given).
       expiry is specified as an integer followed by one of d 
       (days), h (hours), or m (minutes).  Combinations (such as 
       1h30m) are not permitted.  If a unit specifier is not 
       included, the default is days (so +30 by itself means 30 
       days).  To add an AKILL which does not expire, use +0.  If the
       usermask to be added starts with a +, an expiry time must
       be given, even if it is the same as the default.  The
       current AKILL default expiry time can be found with the
       STATS AKILL command.
       
       The AKILL DEL command removes the given mask from the
       AKILL list if it is present.  If a list of entry numbers is 
       given, those entries are deleted.  (See the example for LIST 
       below.)
       
       The AKILL LIST command displays the AKILL list.  
       If a wildcard mask is given, only those entries matching the
       mask are displayed.  If a list of entry numbers is given,
       only those entries are shown; for example:
      
          AKILL LIST 2-5,7-9
             Lists AKILL entries numbered 2 through 5 and 7 
             through 9.
             
       AKILL VIEW is a more verbose version of AKILL LIST, and 
       will show who added an AKILL, the date it was added, and when 
       it expires, as well as the user@host/ip mask and reason.
       
       AKILL CLEAR clears all entries of the AKILL list.
       
       Limited to Services operators.
       
      
    • SGLINE
       Syntax: /msg OperServ  SGLINE ADD [+expiry] mask:reason
           SGLINE DEL {mask | entry-num | list}
               SGLINE LIST [mask | list]
               SGLINE VIEW [mask | list]
               SGLINE CLEAR
       
       Allows Services operators to manipulate the SGLINE list.  If
       a user with a realname matching an SGLINE mask attempts to 
       connect, Services will not allow it to pursue his IRC
       session.
       
       SGLINE ADD adds the given realname mask to the SGLINE
       list for the given reason (which must be given).
       expiry is specified as an integer followed by one of d 
       (days), h (hours), or m (minutes).  Combinations (such as 
       1h30m) are not permitted.  If a unit specifier is not 
       included, the default is days (so +30 by itself means 30 
       days).  To add an SGLINE which does not expire, use +0.  If the
       realname mask to be added starts with a +, an expiry time must
       be given, even if it is the same as the default.  The
       current SGLINE default expiry time can be found with the
       STATS AKILL command.
       Note: because the realname mask may contain spaces, the
       separator between it and the reason is a colon.
       
       The SGLINE DEL command removes the given mask from the
       SGLINE list if it is present.  If a list of entry numbers is 
       given, those entries are deleted.  (See the example for LIST 
       below.)
       
       The SGLINE LIST command displays the SGLINE list.  
       If a wildcard mask is given, only those entries matching the
       mask are displayed.  If a list of entry numbers is given,
       only those entries are shown; for example:
      
          SGLINE LIST 2-5,7-9
             Lists SGLINE entries numbered 2 through 5 and 7 
             through 9.
             
       SGLINE VIEW is a more verbose version of SGLINE LIST, and 
       will show who added an SGLINE, the date it was added, and when 
       it expires, as well as the realname mask and reason.
       
       SGLINE CLEAR clears all entries of the SGLINE list.
       
       Limited to Services operators.
      
      
    • SQLINE
       Syntax: /msg OperServ  SQLINE ADD [+expiry] mask reason
               SQLINE DEL {mask | entry-num | list}
               SQLINE LIST [mask | list]
               SQLINE VIEW [mask | list]
               SQLINE CLEAR
       
       Allows Services operators to manipulate the SQLINE list.  If
       a user with a nick matching an SQLINE mask attempts to 
       connect, Services will not allow it to pursue his IRC
       session.
      
       If the first character of the mask is #, services will 
       prevent the use of matching channels (on IRCds that 
       support it).
       
       SQLINE ADD adds the given mask to the SQLINE
       list for the given reason (which must be given).
       expiry is specified as an integer followed by one of d 
       (days), h (hours), or m (minutes).  Combinations (such as 
       1h30m) are not permitted.  If a unit specifier is not 
       included, the default is days (so +30 by itself means 30 
       days).  To add an SQLINE which does not expire, use +0.  
       If the mask to be added starts with a +, an expiry time 
       must be given, even if it is the same as the default. The
       current SQLINE default expiry time can be found with the
       STATS AKILL command.
       
       The SQLINE DEL command removes the given mask from the
       SQLINE list if it is present.  If a list of entry numbers is 
       given, those entries are deleted.  (See the example for LIST 
       below.)
       
       The SQLINE LIST command displays the SQLINE list.  
       If a wildcard mask is given, only those entries matching the
       mask are displayed.  If a list of entry numbers is given,
       only those entries are shown; for example:
      
          SQLINE LIST 2-5,7-9
             Lists SQLINE entries numbered 2 through 5 and 7 
             through 9.
             
       SQLINE VIEW is a more verbose version of SQLINE LIST, and 
       will show who added an SQLINE, the date it was added, and when 
       it expires, as well as the mask and reason.
       
       SQLINE CLEAR clears all entries of the SQLINE list.
       
       Limited to Services operators.
      
      
    • SZLINE
       Syntax: /msg OperServ  SZLINE ADD [+expiry] mask reason
               SZLINE DEL {mask | entry-num | list}
               SZLINE LIST [mask | list]
               SZLINE VIEW [mask | list]
               SZLINE CLEAR
       
       Allows Services operators to manipulate the SZLINE list.  If
       a user with an IP matching an SZLINE mask attempts to 
       connect, Services will not allow it to pursue his IRC
       session (and this, whether the IP has a PTR RR or not).
       
       SZLINE ADD adds the given IP mask to the SZLINE
       list for the given reason (which must be given).
       expiry is specified as an integer followed by one of d 
       (days), h (hours), or m (minutes).  Combinations (such as 
       1h30m) are not permitted.  If a unit specifier is not 
       included, the default is days (so +30 by itself means 30 
       days).  To add an SZLINE which does not expire, use +0.  If the
       realname mask to be added starts with a +, an expiry time must
       be given, even if it is the same as the default.  The
       current SZLINE default expiry time can be found with the
       STATS AKILL command.
       
       The SZLINE DEL command removes the given mask from the
       SZLINE list if it is present.  If a list of entry numbers is 
       given, those entries are deleted.  (See the example for LIST 
       below.)
       
       The SZLINE LIST command displays the SZLINE list.  
       If a wildcard mask is given, only those entries matching the
       mask are displayed.  If a list of entry numbers is given,
       only those entries are shown; for example:
      
          SZLINE LIST 2-5,7-9
             Lists SZLINE entries numbered 2 through 5 and 7 
             through 9.
             
       SZLINE VIEW is a more verbose version of SZLINE LIST, and 
       will show who added an SZLINE, the date it was added, and when
       it expires, as well as the IP mask and reason.
       
       SZLINE CLEAR clears all entries of the SZLINE list.
       
       Limited to Services operators.
      
      
    • SET
       Syntax: /msg OperServ  SET option setting
      
       Sets various global Services options.  Option names
       currently defined are:
           READONLY   Set read-only or read-write mode
           LOGCHAN    Report log messages to a channel
           DEBUG      Activate or deactivate debug mode
           NOEXPIRE   Activate or deactivate no expire mode
           SUPERADMIN Activate or deactivate super-admin mode
           SQL        Activate or deactivate sql mode
           IGNORE     Activate or deactivate ignore mode
           LIST       List the options
      
       Limited to Services admins.
      
      
    • SET READONLY
       Syntax: /msg OperServ  SET READONLY {ON | OFF}
       
       Sets read-only mode on or off.  In read-only mode, normal
       users will not be allowed to modify any Services data,
       including channel and nickname access lists, etc.  IRCops
       with sufficient Services privileges will be able to modify
       Services' AKILL list and drop or forbid nicknames and
       channels, but any such changes will not be saved unless
       read-only mode is deactivated before Services is terminated
       or restarted.
       
       This option is equivalent to the command-line option
       -readonly.
      
      
    • SET LOGCHAN
       Syntax: /msg OperServ  SET LOGCHAN {ON | OFF}
      
       With this setting on, Services will send its logs to a specified
       channel as well as the log file. LogChannel must also be defined
       in the Services configuration file for this setting to be of any
       use.
      
       Note: This can have strong security implications if your log
       channel is not properly secured.
      
      
    • SET DEBUG
       Syntax: /msg OperServ  SET DEBUG {ON | OFF | num}
       
       Sets debug mode on or off.  In debug mode, all data sent to
       and from Services as well as a number of other debugging
       messages are written to the log file.  If num is
       given, debug mode is activated, with the debugging level set
       to num.
      
       This option is equivalent to the command-line option
       -debug.
      
      
    • SET LIST
       Syntax: /msg OperServ  SET LIST
      
       Display the various OperServ settings
      
      
    • SET NOEXPIRE
       Syntax: /msg OperServ  SET NOEXPIRE {ON | OFF}
      
       Sets no expire mode on or off.  In no expire mode, nicks,
       channels, akills and exceptions won't expire until the
       option is unset.
      
       This option is equivalent to the command-line option
       -noexpire.
      
      
    • SET SQL
       Syntax: /msg OperServ  SET SQL {ON | OFF}
      
       Setting this will toggle Anope's from usage of SQL, this should
       be used to disable and enable SQL should your SQL server go down
       while services are running.
      
      
    • SET SUPERADMIN
       Syntax: /msg OperServ  SET SUPERADMIN {ON | OFF}
      
       Setting this will grant you extra privileges such as the
       ability to be "founder" on all channel's etc...
      
       This option is not persistant, and should only be used when
       needed, and set back to OFF when no longer needed.
      
      
    • NOOP
       Syntax: /msg OperServ  NOOP SET server
               NOOP REVOKE server
      
       NOOP SET remove all O:lines of the given
       server and kill all IRCops currently on it to
       prevent them from rehashing the server (because this
       would just cancel the effect).
      
       NOOP REVOKE makes all removed O:lines available again
       on the given server.
      
       Note: The server is not checked at all by the
       Services.
       
       Limited to Services admins.
      
      
    • JUPE
       Syntax: /msg OperServ  JUPE server [reason]
       
       Tells Services to jupiter a server -- that is, to create
       a fake "server" connected to Services which prevents
       the real server of that name from connecting.  The jupe
       may be removed using a standard SQUIT.  If a reason is
       given, it is placed in the server information field;
       otherwise, the server information field will contain the
       text "Juped by <nick>", showing the nickname of the
       person who jupitered the server.
       
       Limited to Services admins.
      
      
    • RAW
       Syntax: /msg OperServ  RAW text
       
       Sends a string of text directly to the server to which
       Services is connected.  This command has a very limited
       range of uses, and can wreak havoc on a network if used
       improperly.  DO NOT USE THIS COMMAND unless you are
       absolutely certain you know what you are doing!
       
       Limited to Services admins.
      
      
    • UPDATE
       Syntax: /msg OperServ  UPDATE
       
       Causes Services to update all database files as soon as you
       send the command.
       
       Limited to Services admins.
       
      
    • RELOAD
       Syntax: /msg OperServ  RELOAD
      
       Causes Services to reload the configuration file. Note that
       some directives still need the restart of the Services to
       take effect (such as Services' nicknames, activation of the 
       session limitation, etc.)
       
       Limited to Services admins.
      
      
    • QUIT
       Syntax: /msg OperServ  QUIT
       
       Causes Services to do an immediate shutdown; databases are
       not saved.  This command should not be used unless
       damage to the in-memory copies of the databases is feared
       and they should not be saved.  For normal shutdowns, use the
       SHUTDOWN command.
       
       Limited to Services admins.
      
      
    • SHUTDOWN
       Syntax: /msg OperServ  SHUTDOWN
       
       Causes Services to save all databases and then shut down.
       
       Limited to Services admins.
      
      
    • RESTART
       Syntax: /msg OperServ  RESTART
       
       Causes Services to save all databases and then restart
       (i.e. exit and immediately re-run the executable).
       
       Limited to Services admins.	
      
      
    • KILLCLONES
       Syntax: /msg OperServ  KILLCLONES nick
       
       Kills all users who have the same hostname as nick. A
       temporary AKILL, in the form *@host, is added to 
       prevent the offending clients from immediately 
       reconnecting. A wallops is also sent indicating who 
       used the command, which host was affected and how many
       users were killed. It's useful for removing numerous 
       clones from the network.
      
       Limited to Services operators.
       
      
    • CHANLIST
       Syntax: /msg OperServ  CHANLIST [{pattern | nick} [SECRET]]
       
       Lists all channels currently in use on the IRC network, whether they
       are registered or not.
      
       If pattern is given, lists only channels that match it. If a nickname
       is given, lists only the channels the user using it is on. If SECRET is
       specified, lists only channels matching pattern that have the +s or
       +p mode.
       
       Limited to Services admins.
      
      
    • USERLIST
       Syntax: /msg OperServ  USERLIST [{pattern | channel} [INVISIBLE]]
       
       Lists all users currently online on the IRC network, whether their
       nick is registered or not.
       
       If pattern is given, lists only users that match it (it must be in
       the format nick!user@host). If channel is given, lists only users
       that are on the given channel. If INVISIBLE is specified, only users
       with the +i flag will be listed.
       
       Limited to Services admins.
      
      
    • EXCEPTION
       Syntax: /msg OperServ  EXCEPTION ADD [+expiry] mask limit reason
               EXCEPTION DEL {mask | list}
               EXCEPTION MOVE num position
               EXCEPTION LIST [mask | list]
               EXCEPTION VIEW [mask | list]
       
       Allows Services admins to manipulate the list of hosts that
       have specific session limits - allowing certain machines, 
       such as shell servers, to carry more than the default number
       of clients at a time. Once a host reaches it's session limit,
       all clients attempting to connect from that host will be
       killed. Before the user is killed, they are notified, via a
       /NOTICE from OperServ, of a source of help regarding session
       limiting. The content of this notice is a config setting.
       
       EXCEPTION ADD adds the given host mask to the exception list.
       Note that nick!user@host and user@host masks are invalid!
       Only real host masks, such as box.host.dom and *.host.dom,
       are allowed because sessions limiting does not take nick or
       user names into account. limit must be a number greater than
       or equal to zero. This determines how many sessions this host
       may carry at a time. A value of zero means the host has an
       unlimited session limit. See the AKILL help for details about
       the format of the optional expiry parameter.
       EXCEPTION DEL removes the given mask from the exception list.
       EXCEPTION MOVE moves exception num to position. The
       exceptions inbetween will be shifted up or down to fill the gap.
       EXCEPTION LIST and EXCEPTION VIEW show all current
       exceptions; if the optional mask is given, the list is limited
       to those exceptions matching the mask. The difference is that
       EXCEPTION VIEW is more verbose, displaying the name of the
       person who added the exception, it's session limit, reason, 
       host mask and the expiry date and time.
       
       Note that a connecting client will "use" the first exception
       their host matches. Large exception lists and widely matching
       exception masks are likely to degrade services' performance.
       
       Limited to Services admins.
      
      
    • SESSION
       Syntax: /msg OperServ  SESSION LIST threshold
               SESSION VIEW host
       
       Allows Services admins to view the session list.
      
       SESSION LIST lists hosts with at least threshold sessions.
       The threshold must be a number greater than 1. This is to 
       prevent accidental listing of the large number of single 
       session hosts.
       SESSION VIEW displays detailed information about a specific
       host - including the current session count and session limit.
       The host value may not include wildcards.
      
       See the EXCEPTION help for more information about session
       limiting and how to set session limits specific to certain
       hosts and groups thereof.
       
       Limited to Services admins.
      
      
    • CHANKILL
       Syntax: /msg OperServ  CHANKILL [+expiry] channel reason
      
       Puts an AKILL for every nick on the specified channel. It
       uses the entire and complete real ident@host for every nick,
       then enforces the AKILL. 
      
      
      
    • DEFCON
       Syntax: /msg OperServ  DEFCON [1|2|3|4|5]
      
       The defcon system can be used to implement a pre-defined
       set of restrictions to services useful during an attempted
       attack on the network.
      
      
    • DEFCON AKILL NEW CLIENTS
       * AKILL any new clients connecting
      
    • DEFCON FORCE CHAN MODES
       * Force Chan Modes (OperServ) to be set on all channels
      
    • DEFCON NO MLOCK CHANGE
       * No MLOCK changes
      
    • DEFCON NO NEW CHANNELS
       * No new channel registrations
      
    • DEFCON NO NEW CLIENTS
       * Kill any NEW clients connecting
      
    • DEFCON NO NEW MEMOS
       * No new memos sent
      
    • DEFCON NO NEW NICKS
       * No new nick registrations
      
    • DEFCON ONLY
       * Ignore any non-opers with message
      
    • DEFCON REDUCE SESSION
       * Use the reduced session limit of <num>
      
    • DEFCON SILENT ONLY
       * Silently ignore non-opers
      
    • LOGGED
       Notice: All commands sent to OperServ are logged!
      
      
    • MODINFO
       Syntax: /msg OperServ  MODINFO FileName
      
       This command lists information about the specified loaded module
      
       Limited to Services Roots.
      
      
    • MODLIST
       Syntax: /msg OperServ  MODLIST
      
       Lists all currently loaded modules.
      
       Limited to IRC Operators.
      
      
      
    • MODLOAD
       Syntax: /msg OperServ  MODLOAD FileName
      
       This command loads the module named FileName from the modules
       directory.
      
       Limited to Services Roots.
      
      
    • MODUNLOAD
       Syntax: /msg OperServ  MODUNLOAD FileName
      
       This command unloads the module named FileName from the modules
       directory.
      
       Limited to Services Roots.
      
      
    • SVSNICK
       Syntax: /msg OperServ  SVSNICK nick newnick
       
       Forcefully changes a user's nickname from nick to newnick.
       
       Limited to Super admins
      
      
    catalan . german . english . spanish . french . greek . hungarian . italian . dutch . polish . portuguese . russian . turkish
Generated by Anope docgen.pl 2.2

Docgen Output Tarball

Valid XHTML 1.0!