Anope 1.7.15.1156 - NickServ
    catalan . german . english . spanish . french . greek . hungarian . italian . dutch . polish . portuguese . russian . turkish

    | NickServ | ChanServ | OperServ | MemoServ | HostServ | BotServ |

    • HELP
       NickServ allows you to "register" a nickname and
       prevent others from using it. The following
       commands allow for registration and maintenance of
       nicknames; to use them, type %RNickServ command.
       For more information on a specific command, type
       %RNickServ HELP command.
       
       
      
    • REGISTER
       Syntax: /msg NickServ  REGISTER password [email]
       
       Registers your nickname in the NickServ database.  Once
       your nick is registered, you can use the SET and ACCESS
       commands to configure your nick's settings as you like
       them.  Make sure you remember the password you use when
       registering - you'll need it to make changes to your nick
       later.  (Note that case matters!  ANOPE, Anope, and 
       anope are all different passwords!)
       
       Guidelines on choosing passwords:
       
       Passwords should not be easily guessable.  For example,
       using your real name as a password is a bad idea.  Using
       your nickname as a password is a much worse idea ;) and,
       in fact, NickServ will not allow it.  Also, short
       passwords are vulnerable to trial-and-error searches, so
       you should choose a password at least 5 characters long.
       Finally, the space character cannot be used in passwords.
       
       The parameter email is optional and will set the email
       for your nick immediately. However, it may be required
       on certain networks.
       Your privacy is respected; this e-mail won't be given to
       any third-party person.
       
       This command also creates a new group for your nickname,
       that will allow you to register other nicks later sharing
       the same configuration, the same set of memos and the
       same channel privileges. For more information on this
       feature, type %RNickServ HELP GROUP.
       
      
    • GROUP
       Syntax: /msg NickServ  GROUP target password
       
       This command makes your nickname join the target nickname's 
       group. password is the password of the target nickname.
       
       Joining a group will allow you to share your configuration,
       memos, and channel privileges with all the nicknames in the
       group, and much more!
        
       A group exists as long as it is useful. This means that even
       if a nick of the group is dropped, you won't lose the
       shared things described above, as long as there is at
       least one nick remaining in the group.
       
       You can use this command even if you have not registered
       your nick yet. If your nick is already registered, you'll
       need to identify yourself before using this command. Type
       %RNickServ HELP IDENTIFY for more information. This
       last may be not possible on your IRC network.
       
       It is recommended to use this command with a non-registered
       nick because it will be registered automatically when 
       using this command. You may use it with a registered nick (to 
       change your group) only if your network administrators allowed 
       it.
       
       You can only be in one group at a time. Group merging is
       not possible.
       
       Note: all the nicknames of a group have the same password.
      
      
    • IDENTIFY
       Syntax: /msg NickServ  IDENTIFY password
       
       Tells NickServ that you are really the owner of this
       nick.  Many commands require you to authenticate yourself
       with this command before you use them.  The password
       should be the same one you sent with the REGISTER
       command.
      
      
    • LOGOUT
       Syntax: /msg NickServ  LOGOUT
       
       This reverses the effect of the IDENTIFY command, i.e.
       make you not recognized as the real owner of the nick
       anymore. Note, however, that you won't be asked to reidentify
       yourself.
      
      
    • DROP
       Syntax: /msg NickServ  DROP [nickname]
       
       Drops your nickname from the NickServ database.  A nick
       that has been dropped is free for anyone to re-register.
       
       You may drop a nick within your group by passing it
       as the nick parameter.
       
       In order to use this command, you must first identify
       with your password (%RNickServ HELP IDENTIFY for more
       information).
      
      
    • ACCESS
       Syntax: /msg NickServ  ACCESS ADD mask
               ACCESS DEL mask
               ACCESS LIST
       
       Modifies or displays the access list for your nick.  This
       is the list of addresses which will be automatically
       recognized by NickServ as allowed to use the nick.  If
       you want to use the nick from a different address, you
       need to send an IDENTIFY command to make NickServ
       recognize you.
       
       Examples:
       
           ACCESS ADD anyone@*.bepeg.com
               Allows access to user anyone from any machine in
               the bepeg.com domain.
       
           ACCESS DEL anyone@*.bepeg.com
               Reverses the previous command.
       
           ACCESS LIST
               Displays the current access list.
      
      
    • SET
       Syntax: /msg NickServ  SET option parameters
       
       Sets various nickname options.  option can be one of:
       
           DISPLAY    Set the display of your group in Services
           PASSWORD   Set your nickname password
           LANGUAGE   Set the language Services will use when
                          sending messages to you
           URL        Associate a URL with your nickname
           EMAIL      Associate an E-mail address with your nickname
           ICQ        Associate an ICQ number with your nickname
           GREET      Associate a greet message with your nickname
           KILL       Turn protection on or off
           SECURE     Turn nickname security on or off
           PRIVATE    Prevent your nickname from appearing in a
                          %RNickServ LIST
           HIDE       Hide certain pieces of nickname information
           MSG        Change the communication method of Services
           AUTOOP     Should services op you automatically.    
       
       In order to use this command, you must first identify
       with your password (%RNickServ HELP IDENTIFY for more
       information).
       
       Type %RNickServ HELP SET option for more information
       on a specific option.
      
      
    • SET DISPLAY
       Syntax: /msg NickServ  SET DISPLAY new-display
       
       Changes the display used to refer to your nickname group in 
       Services. The new display MUST be a nick of your group.
      
      
    • SET PASSWORD
       Syntax: /msg NickServ  SET PASSWORD new-password
       
       Changes the password used to identify you as the nick's
       owner.
      
      
    • SET LANGUAGE
       Syntax: /msg NickServ  SET LANGUAGE number
       
       Changes the language Services uses when sending messages to
       you (for example, when responding to a command you send).
       number should be chosen from the following list of
       supported languages:
       
      
      
    • SET URL
       Syntax: /msg NickServ  SET URL url
       
       Associates the given URL with your nickname.  This URL
       will be displayed whenever someone requests information
       on your nick with the INFO command.
      
      
    • SET EMAIL
       Syntax: /msg NickServ  SET EMAIL address
       
       Associates the given E-mail address with your nickname.
       This address will be displayed whenever someone requests
       information on the channel with the INFO command.
       
      
    • SET HIDE
       Syntax: /msg NickServ  SET HIDE {EMAIL | STATUS | USERMASK | QUIT} {ON | OFF}
       
       Allows you to prevent certain pieces of information from
       being displayed when someone does a NickServ INFO on your
       nick.  You can hide your E-mail address (EMAIL), last seen
       user@host mask (USERMASK), your services access status
       (STATUS) and  last quit message (QUIT).
       The second parameter specifies whether the information should
       be displayed (OFF) or hidden (ON).
       
      
    • SET ICQ
       Syntax: /msg NickServ  SET ICQ number
       
       Associates the given ICQ number with your nickname.  This 
       number will be displayed whenever someone requests 
       information on your nick with the INFO command.
       
      
    • SET GREET
       Syntax: /msg NickServ  SET GREET message
       
       Makes the given message the greet of your nickname, that
       will be displayed when joining a channel that has GREET
       option enabled, provided that you have the necessary 
       access on it.
      
      
    • SET KILL
       Syntax: /msg NickServ  SET KILL {ON | QUICK | IMMED | OFF}
       
       Turns the automatic protection option for your nick
       on or off.  With protection on, if another user
       tries to take your nick, they will be given one minute to
       change to another nick, after which NickServ will forcibly change
       their nick.
       
       If you select QUICK, the user will be given only 20 seconds
       to change nicks instead of the usual 60.  If you select
       IMMED, user's nick will be changed immediately without being
       warned first or given a chance to change their nick; please
       do not use this option unless necessary.  Also, your
       network's administrators may have disabled this option.
      
      
    • SET SECURE
       Syntax: /msg NickServ  SET SECURE {ON | OFF}
       
       Turns NickServ's security features on or off for your
       nick.  With SECURE set, you must enter your password
       before you will be recognized as the owner of the nick,
       regardless of whether your address is on the access
       list.  However, if you are on the access list, NickServ
       will not auto-kill you regardless of the setting of the
       KILL option.
      
      
    • SET PRIVATE
       Syntax: /msg NickServ  SET PRIVATE {ON | OFF}
       
       Turns NickServ's privacy option on or off for your nick.
       With PRIVATE set, your nickname will not appear in
       nickname lists generated with NickServ's LIST command.
       (However, anyone who knows your nickname can still get
       information on it using the INFO command.)
      
      
    • UPDATE
       Syntax: /msg NickServ  UPDATE
      
       Updates your current status, i.e. it checks for new memos,
       sets needed chanmodes (ModeonID) and updates your vhost and
       your userflags (lastseentime, etc).
       
      
    • SET HIDE
       Syntax: /msg NickServ  SET HIDE {EMAIL | STATUS | USERMASK | QUIT} {ON | OFF}
       
       Allows you to prevent certain pieces of information from
       being displayed when someone does a NickServ INFO on your
       nick.  You can hide your E-mail address (EMAIL), last seen
       user@host mask (USERMASK), your services access status
       (STATUS) and  last quit message (QUIT).
       The second parameter specifies whether the information should
       be displayed (OFF) or hidden (ON).
       
      
    • SET MSG
       Syntax: /msg NickServ  SET MSG {ON | OFF}
       
       Allows you to choose the way Services are communicating with 
       you. With MSG set, Services will use messages, else they'll 
       use notices.
      
      
    • RECOVER
       Syntax: /msg NickServ  RECOVER nickname [password]
       
       Allows you to recover your nickname if someone else has
       taken it; this does the same thing that NickServ does
       automatically if someone tries to use a kill-protected
       nick.
       
       When you give this command, NickServ will bring a fake
       user online with the same nickname as the user you're
       trying to recover your nick from.  This causes the IRC
       servers to disconnect the other user.  This fake user will
       will remain online for one minute to ensure that the other
       user does not immediately reconnect; after that minute, you
       can reclaim your nick.  Alternatively, use the RELEASE
       command (%RNickServ HELP RELEASE) to get the nick
       back sooner.
       
       In order to use the RECOVER command for a nick, your
       current address as shown in /WHOIS must be on that nick's
       access list, you must be identified and in the group of
       that nick, or you must supply the correct password for
       the nickname.
      
      
    • RELEASE
       Syntax: /msg NickServ  RELEASE nickname [password]
       
       Instructs NickServ to remove any hold on your nickname
       caused by automatic kill protection or use of the RECOVER
       command.  By default, such holds last for one minute;
       this command gets rid of them sooner.
       
       In order to use the RELEASE command for a nick, your
       current address as shown in /WHOIS must be on that nick's
       access list, you must be identified and in the group of
       that nick, or you must supply the correct password for
       the nickname.
      
      
    • GHOST
       Syntax: /msg NickServ  GHOST nickname [password]
       
       Terminates a "ghost" IRC session using your nick.  A
       "ghost" session is one which is not actually connected,
       but which the IRC server believes is still online for one
       reason or another.  Typically, this happens if your
       computer crashes or your Internet or modem connection
       goes down while you're on IRC.
       
       In order to use the GHOST command for a nick, your
       current address as shown in /WHOIS must be on that nick's
       access list, you must be identified and in the group of
       that nick, or you must supply the correct password for
       the nickname.
      
      
    • INFO
       Syntax: /msg NickServ  INFO nickname [ALL]
       
       Displays information about the given nickname, such as
       the nick's owner, last seen address and time, and nick
       options. If you are identified for the nick you're 
       getting information for and ALL is specified, you will
       be shown all the information; regardless of whether 
       it's hidden or not.
      
      
    • LIST
       Syntax: /msg NickServ  LIST pattern
       
       Lists all registered nicknames which match the given
       pattern, in nick!user@host format.  Nicks with the
       PRIVATE option set will not be displayed.
       
       Examples:
       
           LIST *!joeuser@foo.com
               Lists all nicks owned by joeuser@foo.com.
       
           LIST *Bot*!*@*
               Lists all registered nicks with Bot in their
               names (case insensitive).
       
           LIST *!*@*.bar.org
               Lists all nicks owned by users in the bar.org
               domain.
      
      
    • ALIST
       Syntax: /msg NickServ  ALIST [level]
       
       Lists all channels you have access on. Optionally, you can specify
       a level in XOP or ACCESS format. The resulting list will only
       include channels where you have the given level of access.
      
       Examples:
           ALIST Founder
               Lists all channels where you have Founder
               access.
      
           ALIST AOP
               Lists all channels where you have AOP
               access or greater.
      
           ALIST 10
               Lists all channels where you have level 10
               access or greater.
      
       Channels that have the NOEXPIRE option set will be
       prefixed by an exclamation mark.
      
      
    • GLIST
       Syntax: /msg NickServ  GLIST
       
       Lists all nicks in your group.
      
      
    • STATUS
       Syntax: /msg NickServ  STATUS nickname...
       
       Returns whether the user using the given nickname is
       recognized as the owner of the nickname.  The response has
       this format:
       
           nickname status-code
       
       where nickname is the nickname sent with the command, and
       status-code is one of the following:
       
           0 - no such user online or nickname not registered
           1 - user not recognized as nickname's owner
           2 - user recognized as owner via access list only
           3 - user recognized as owner via password identification
       
       Up to sixteen nicknames may be sent with each command; the
       rest will be ignored. If no nickname is given, your status
       will be returned.
      
      
    • SENDPASS
       Syntax: /msg NickServ  SENDPASS nickname
       
       Send the password of the given nickname to the e-mail address
       set in the nickname record. This command is really useful
       to deal with lost passwords.
       
       May be limited to IRC operators on certain networks.
       
       This command is unavailable when encryption is enabled.
      
      
    • EXPIRES
       
       Nicknames that are not used anymore are subject to 
       the automatic expiration, i.e. they will be deleted
       after <num> days if not used.
      
      
    • SERVADMIN HELP
        
       Services admins can also drop any nickname without needing
       to identify for the nick, and may view the access list for
       any nickname (%RNickServ ACCESS LIST nick).
      
      
    • SERVADMIN LOGOUT
       Syntax: /msg NickServ  LOGOUT [nickname [REVALIDATE]]
       
       Without a parameter, reverses the effect of the IDENTIFY 
       command, i.e. make you not recognized as the real owner of the nick
       anymore. Note, however, that you won't be asked to reidentify
       yourself.
       
       With a parameter, does the same for the given nick. If you 
       specify REVALIDATE as well, Services will ask the given nick
       to re-identify. This use limited to Services admins.
      
      
    • SERVADMIN DROP
       Syntax: /msg NickServ  DROP [nickname]
       
       Without a parameter, drops your nickname from the
       NickServ database.
       
       With a parameter, drops the named nick from the database.
       You may drop any nick within your group without any 
       special privileges. Dropping any nick is limited to 
       Services admins.
      
      
    • SERVADMIN LIST
       Syntax: /msg NickServ  LIST pattern [FORBIDDEN] [NOEXPIRE] [UNCONFIRMED]
       
       Lists all registered nicknames which match the given
       pattern, in nick!user@host format.  Nicks with the PRIVATE
       option set will only be displayed to Services admins.  Nicks
       with the NOEXPIRE option set will have a ! appended to the
       nickname for Services admins.
       
       If the FORBIDDEN, NOEXPIRE or UNCONFIRMED options are given, only
       nicks which, respectively, are FORBIDden, UNCONFIRMED or have the
       NOEXPIRE flag set will be displayed. If all three options are
       given, all three types of nicks will be displayed. These options
       are limited to Services admins.  
      
       Examples:
       
           LIST *!joeuser@foo.com
               Lists all registered nicks owned by joeuser@foo.com.
       
           LIST *Bot*!*@*
               Lists all registered nicks with Bot in their
               names (case insensitive).
       
           LIST * NOEXPIRE
               Lists all registered nicks which have been set to
               not expire.
      
      
    • SERVADMIN ALIST
       Syntax: /msg NickServ  ALIST [nickname] [level]
       
       With no parameters, lists channels you have access on. With
       one parameter, lists channels that nickname has access 
       on. With two parameters lists channels that nickname has 
       level access or greater on.
      
       This use limited to Services admins.
      
      
    • SERVADMIN GLIST
       Syntax: /msg NickServ  GLIST [nickname]
       
       Without a parameter, lists all nicknames that are in
       your group.
       
       With a parameter, lists all nicknames that are in the
       group of the given nick.
       This use limited to Services admins.
      
      
    • SERVADMIN GETPASS
       Syntax: /msg NickServ  GETPASS nickname
       
       Returns the password for the given nickname.  Note that
       whenever this command is used, a message including the
       person who issued the command and the nickname it was used
       on will be logged and sent out as a WALLOPS/GLOBOPS.
       
       Limited to Services admins.
       
       This command is unavailable when encryption is enabled.
      
      
    • SERVADMIN FORBID
       Syntax: /msg NickServ  FORBID nickname [reason]
       
       Disallows a nickname from being registered or used by
       anyone.  May be cancelled by dropping the nick.
       
       On certain networks, reason is required.
       
       Limited to Services admins.
      
      
    • SERVADMIN INFO
       
       Services admins may use the ALL parameter with any nick.
      
      
    catalan . german . english . spanish . french . greek . hungarian . italian . dutch . polish . portuguese . russian . turkish
Generated by Anope docgen.pl 2.2

Docgen Output Tarball

Valid XHTML 1.0!