Anope 1.7.15.1156 - MemoServ
    catalan . german . english . spanish . french . greek . hungarian . italian . dutch . polish . portuguese . russian . turkish

    | NickServ | ChanServ | OperServ | MemoServ | HostServ | BotServ |

    • SEND
       Syntax: /msg MemoServ  SEND {nick | channel} memo-text
       
       Sends the named nick or channel a memo containing
       memo-text.  When sending to a nickname, the recipient will
       receive a notice that he/she has a new memo.  The target
       nickname/channel must be registered.
       
      
    • SENDALL
       Syntax: /msg MemoServ  SENDALL memo-text
      
       Sends all registered users a memo containing memo-text.
       
      
    • CANCEL
       Syntax: /msg MemoServ  CANCEL {nick | channel}
       
       Cancels the last memo you sent to the given nick or channel,
       provided it has not been read at the time you use the command.
      
      
    • CHECK
       Syntax: /msg MemoServ  CHECK nick
       
       Checks whether the _last_ memo you sent to nick has been read
       or not. Note that this does only work with nicks, not with chans.
      
      
    • LIST
       Syntax: /msg MemoServ  LIST [channel] [list | NEW]
       
       Lists any memos you currently have.  With NEW, lists only
       new (unread) memos.  Unread memos are marked with a "*"
       to the left of the memo number.  You can also specify a list
       of numbers, as in the example below:
      
          LIST 2-5,7-9
             Lists memos numbered 2 through 5 and 7 through 9.
      
      
    • READ
       Syntax: /msg MemoServ  READ [channel] {num | list | LAST | NEW}
       
       Sends you the text of the memos specified.  If LAST is
       given, sends you the memo you most recently received.  If
       NEW is given, sends you all of your new memos.  Otherwise,
       sends you memo number num.  You can also give a list of
       numbers, as in this example:
       
          READ 2-5,7-9
             Displays memos numbered 2 through 5 and 7 through 9.
      
      
    • RSEND
       Syntax: /msg MemoServ  RSEND {nick | channel} memo-text
       
       Sends the named nick or channel a memo containing
       memo-text.  When sending to a nickname, the recipient will
       receive a notice that he/she has a new memo.  The target
       nickname/channel must be registered.
       Once the memo is read by its recipient, an automatic notification
       memo will be sent to the sender informing him/her that the memo
       has been read.
      
      
    • DEL
       Syntax: /msg MemoServ  DEL [channel] {num | list | LAST | ALL}
       
       Deletes the specified memo or memos.  You can supply
       multiple memo numbers or ranges of numbers instead of a
       single number, as in the second example below.
       
       If LAST is given, the last memo will be deleted.
       If ALL is given, deletes all of your memos.
       
       Examples:
       
          DEL 1
             Deletes your first memo.
       
          DEL 2-5,7-9
             Deletes memos numbered 2 through 5 and 7 through 9.
      
      
    • SET
       Syntax: /msg MemoServ  SET option parameters
      
       Sets various memo options.  option can be one of:
       
           NOTIFY      Changes when you will be notified about
                           new memos (only for nicknames)
           LIMIT       Sets the maximum number of memos you can
                           receive
       
       Type %RMemoServ HELP SET option for more information
       on a specific option.
      
      
    • SET NOTIFY
       Syntax: /msg MemoServ  SET NOTIFY {ON | LOGON | NEW | OFF}
      
       Changes when you will be notified about new memos:
       
           ON      You will be notified of memos when you log on,
                      when you unset /AWAY, and when they are sent
                      to you.
           LOGON   You will only be notified of memos when you log
                      on or when you unset /AWAY.
           NEW     You will only be notified of memos when they
                      are sent to you.
           OFF     You will not receive any notification of memos.
       
       ON is essentially LOGON and NEW combined.
      
      
    • SET LIMIT
       Syntax: /msg MemoServ  SET LIMIT [channel] limit
       
       Sets the maximum number of memos you (or the given channel)
       are allowed to have. If you set this to 0, no one will be
       able to send any memos to you.  However, you cannot set
       this any higher than <num>.
      
      
    • INFO
       Syntax: /msg MemoServ  INFO [channel]
       
       Displays information on the number of memos you have, how
       many of them are unread, and how many total memos you can
       receive.  With a parameter, displays the same information
       for the given channel.
      
      
    • STAFF
       Syntax: /msg MemoServ  STAFF memo-text
      
       Sends all services staff a memo containing memo-text.
       Note: If you have opers on both the oper list and the
       admin list they will receive the memo twice.  The same
       applies for oper's on the Root list as well as other
       lists.
      
      
    • SERVADMIN SET LIMIT
       Syntax: /msg MemoServ  SET LIMIT [user | channel] {limit | NONE} [HARD]
       
       Sets the maximum number of memos a user or channel is
       allowed to have.  Setting the limit to 0 prevents the user
       from receiving any memos; setting it to NONE allows the
       user to receive and keep as many memos as they want.  If
       you do not give a nickname or channel, your own limit is
       set.
       
       Adding HARD prevents the user from changing the limit.  Not
       adding HARD has the opposite effect, allowing the user to
       change the limit (even if a previous limit was set with
       HARD).
      
       This use of the SET LIMIT command is limited to Services
       admins.  Other users may only enter a limit for themselves
       or a channel on which they have such privileges, may not
       remove their limit, may not set a limit above <num>, and may
       not set a hard limit.
      
      
    • SERVADMIN INFO
       Syntax: /msg MemoServ  INFO [nick | channel]
      
       Without a parameter, displays information on the number of
       memos you have, how many of them are unread, and how many
       total memos you can receive.
       
       With a channel parameter, displays the same information for
       the given channel.
       
       With a nickname parameter, displays the same information
       for the given nickname.  This use limited to Services
       admins.
      
      
    catalan . german . english . spanish . french . greek . hungarian . italian . dutch . polish . portuguese . russian . turkish
Generated by Anope docgen.pl 2.2

Docgen Output Tarball

Valid XHTML 1.0!