Anope 1.7.15.1156 - ChanServ
    catalan . german . english . spanish . french . greek . hungarian . italian . dutch . polish . portuguese . russian . turkish

    | NickServ | ChanServ | OperServ | MemoServ | HostServ | BotServ |

    • HELP
       ChanServ allows you to register and control various
       aspects of channels.  ChanServ can often prevent
       malicious users from "taking over" channels by limiting
       who is allowed channel operator privileges.  Available
       commands are listed below; to use them, type
       %RChanServ command.  For more information on a
       specific command, type %RChanServ HELP command.
        
       
      
    • EXPIRES
       
       Note that any channel which is not used for <num> days
       (i.e. which no user on the channel's access list enters
       for that period of time) will be automatically dropped.
      
      
    • REGISTER
       Syntax: /msg ChanServ  REGISTER channel password description
       
       Registers a channel in the ChanServ database.  In order
       to use this command, you must first be a channel operator
       on the channel you're trying to register.  The password
       is used with the IDENTIFY command to allow others to
       make changes to the channel settings at a later time.
       The last parameter, which must be included, is a
       general description of the channel's purpose.
       
       When you register a channel, you are recorded as the
       "founder" of the channel.  The channel founder is allowed
       to change all of the channel settings for the channel;
       ChanServ will also automatically give the founder
       channel-operator privileges when s/he enters the channel.
       See the ACCESS command (%RChanServ HELP ACCESS) for
       information on giving a subset of these privileges to
       other channel users.
       
       NOTICE: In order to register a channel, you must have
       first registered your nickname.  If you haven't,
       %RChanServ HELP for information on how to do so.
      
      
    • IDENTIFY
       Syntax: /msg ChanServ  IDENTIFY channel password
       
       Authenticates you to ChanServ as the founder of the given
       channel.  Many commands require you to use this command
       before using them.  The password should be the same one
       you sent with the REGISTER command.
       
      
    • LOGOUT
       Syntax: /msg ChanServ  LOGOUT channel nickname
       
       This command will log the selected nickname out meaning they 
       would have to reidentify themselves to regain their access.
       
       If you are the founder of the channel, you can log out anybody,
       else you can only log out yourself.
      
      
    • DROP
       Syntax: /msg ChanServ  DROP channel
       
       Unregisters the named channel.  Can only be used by
       channel founder, who must use the IDENTIFY command first.
      
      
    • SET
       Syntax: /msg ChanServ  SET channel option parameters
       
       Allows the channel founder to set various channel options
       and other information.
       
       Available options:
       
           FOUNDER       Set the founder of a channel
           SUCCESSOR     Set the successor for a channel
           PASSWORD      Set the founder password
           DESC          Set the channel description
           URL           Associate a URL with the channel
           EMAIL         Associate an E-mail address with the channel
           ENTRYMSG      Set a message to be sent to users when they
                            enter the channel
           BANTYPE       Set how Services make bans on the channel
           MLOCK         Lock channel modes on or off
           KEEPTOPIC     Retain topic when channel is not in use
           OPNOTICE      Send a notice when OP/DEOP commands are used
           PEACE         Regulate the use of critical commands
           PRIVATE       Hide channel from LIST command
           RESTRICTED    Restrict access to the channel
           SECURE        Activate ChanServ security features
           SECUREOPS     Stricter control of chanop status
           SECUREFOUNDER Stricter control of channel founder status
           SIGNKICK      Sign kicks that are done with KICK command
           TOPICLOCK     Topic can only be changed with TOPIC
           XOP           Toggle the user privilege system
       
       Type %RChanServ HELP SET option for more information on a
       particular option.
      
      
    • SET FOUNDER
       Syntax: /msg ChanServ  SET channel FOUNDER nick
       
       Changes the founder of a channel.  The new nickname must
       be a registered one.
      
      
    • SET SUCCESSOR
       Syntax: /msg ChanServ  SET channel SUCCESSOR nick
       
       Changes the successor of a channel.  If the founder's
       nickname expires or is dropped while the channel is still
       registered, the successor will become the new founder of the
       channel.  However, if the successor already has too many
       channels registered (<num>), the channel will be dropped
       instead, just as if no successor had been set.  The new
       nickname must be a registered one.
      
      
    • SET PASSWORD
       Syntax: /msg ChanServ  SET channel PASSWORD password
       
       Sets the password used to identify as the founder of the
       channel.
      
      
    • SET DESC
       Syntax: /msg ChanServ  SET channel DESC description
       
       Sets the description for the channel, which shows up with
       the LIST and INFO commands.
      
      
    • SET URL
       Syntax: /msg ChanServ  SET channel URL [url]
       
       Associates the given URL with the channel.  This URL will
       be displayed whenever someone requests information on the
       channel with the INFO command.  If no parameter is given,
       deletes any current URL for the channel.
      
      
    • SET EMAIL
       Syntax: /msg ChanServ  SET channel EMAIL [address]
       
       Associates the given E-mail address with the channel.
       This address will be displayed whenever someone requests
       information on the channel with the INFO command.  If no
       parameter is given, deletes any current E-mail address for
       the channel.
      
      
    • SET ENTRYMSG
       Syntax: /msg ChanServ  SET channel ENTRYMSG [message]
       
       Sets the message which will be sent via /notice to users
       when they enter the channel.  If no parameter is given,
       causes no message to be sent upon entering the channel.
      
      
    • SET BANTYPE
       Syntax: /msg ChanServ  SET channel BANTYPE bantype
       
       Sets the ban type that will be used by services whenever
       they need to ban someone from your channel.
       
       bantype is a number between 0 and 3 that means:
       
       0: ban in the form *!user@host
       1: ban in the form *!*user@host
       2: ban in the form *!*@host
       3: ban in the form *!*user@*.domain
      
      
    • SET KEEPTOPIC
       Syntax: /msg ChanServ  SET channel KEEPTOPIC {ON | OFF}
       
       Enables or disables the topic retention option for a
       channel.  When topic retention is set, the topic for the
       channel will be remembered by ChanServ even after the
       last user leaves the channel, and will be restored the
       next time the channel is created.
      
      
    • SET TOPICLOCK
       Syntax: /msg ChanServ  SET channel TOPICLOCK {ON | OFF}
       
       Enables or disables the topic lock option for a channel.
       When topic lock is set, ChanServ will not allow the
       channel topic to be changed except via the TOPIC
       command.
      
      
    • SET MLOCK
       Syntax: /msg ChanServ  SET channel MLOCK modes
       
       Sets the mode-lock parameter for the channel. ChanServ
       allows you to define certain channel modes to be always
       on, off or free to be either on or off.
       
       The modes parameter is constructed exactly the same way 
       as a /MODE command; that is, modes followed by a + are 
       locked on, and modes followed by a - are locked off. Note,
       however, that unlike the /MODE command, each use of
       SET MLOCK will remove all modes previously locked before
       setting the new!
       
       Warning:  If you set a mode-locked key, as in the second
       example below, you should also set the RESTRICTED option for
       the channel (see HELP SET RESTRICTED), or anyone entering
       the channel when it is empty will be able to see the key!
       
       Examples:
       
           SET #channel MLOCK +nt-iklps
               Forces modes n and t on, and modes i, k, l, p, and
               s off.  Mode m is left free to be either on or off.
       
           SET #channel MLOCK +knst-ilmp my-key
               Forces modes k, n, s, and t on, and modes i, l, m,
               and p off.  Also forces the channel key to be
               "my-key".
       
           SET #channel MLOCK +
               Removes the mode lock; all channel modes are free
               to be either on or off.
      
      
    • SET PEACE
       Syntax: /msg ChanServ  SET channel PEACE {ON | OFF}
       
       Enables or disables the peace option for a channel.
       When peace is set, an user won't be able to kick,
       ban or remove a channel status of an user that has
       a level superior or equal to his via ChanServ commands.
      
      
    • SET PRIVATE
       Syntax: /msg ChanServ  SET channel PRIVATE {ON | OFF}
       
       Enables or disables the private option for a channel.
       When private is set, a %RChanServ LIST will not
       include the channel in any lists.
      
      
    • SET RESTRICTED
       Syntax: /msg ChanServ  SET channel RESTRICTED {ON | OFF}
       
       Enables or disables the restricted access option for a
       channel.  When restricted access is set, users who would
       normally be disallowed from having channel operator
       privileges (users with negative access levels and, if
       secure ops is set, users not on the access list) will
       instead be kicked and banned from the channel.
      
      
    • SET SECURE
       Syntax: /msg ChanServ  SET channel SECURE {ON | OFF}
       
       Enables or disables ChanServ's security features for a
       channel.  When SECURE is set, only users who have
       registered their nicknames with ChanServ and IDENTIFY'd
       with their password will be given access to the channel
       as controlled by the access list.
      
      
    • SET SECUREOPS
       Syntax: /msg ChanServ  SET channel SECUREOPS {ON | OFF}
       
       Enables or disables the secure ops option for a channel.
       When secure ops is set, users who are not on the userlist
       will not be allowed chanop status.
       
      
    • SET SECUREFOUNDER
       Syntax: /msg ChanServ  SET channel SECUREFOUNDER {ON | OFF}
       
       Enables or disables the secure founder option for a channel.
       When secure founder is set, only the real founder will be
       able to drop the channel, change its password, its founder and its
       successor, and not those who are IDENTIFY'd with ChanServ.
       
      
    • SET SIGNKICK
       Syntax: /msg ChanServ  SET channel SIGNKICK {ON | LEVEL | OFF}
       
       Enables or disables signed kicks for a
       channel.  When SIGNKICK is set, kicks issued with
       ChanServ KICK command will have the nick that used the
       command in their reason.
       
       If you use LEVEL, those who have a level that is superior 
       or equal to the SIGNKICK level on the channel won't have their 
       kicks signed. See %RChanServ HELP LEVELS for more information. 
      
      
    • SET XOP
       Syntax: /msg ChanServ  SET channel XOP {ON | OFF}
       
       Enables or disables the xOP lists system for a channel.
       When XOP is set, you have to use the AOP/SOP/VOP
       commands in order to give channel privileges to
       users, else you have to use the ACCESS command.
       
       Technical Note: when you switch from access list to xOP 
       lists system, your level definitions and user levels will be
       changed, so you won't find the same values if you
       switch back to access system! 
       
       You should also check that your users are in the good xOP 
       list after the switch from access to xOP lists, because the 
       guess is not always perfect... in fact, it is not recommended 
       to use the xOP lists if you changed level definitions with 
       the LEVELS command.
       
       Switching from xOP lists system to access list system
       causes no problem though.
      
      
    • SET OPNOTICE
       Syntax: /msg ChanServ  SET channel OPNOTICE {ON | OFF}
       
       Enables or disables the op-notice option for a channel.
       When op-notice is set, ChanServ will send a notice to the
       channel whenever the OP or DEOP commands are used for a user
       in the channel.
      
      
    • AOP
       Syntax: /msg ChanServ  AOP channel ADD nick
               AOP channel DEL {nick | entry-num | list}
               AOP channel LIST [mask | list]
               AOP channel CLEAR
       
       Maintains the AOP (AutoOP) list for a channel. The AOP 
       list gives users the right to be auto-opped on your channel,
       to unban or invite themselves if needed, to have their
       greet message showed on join, and so on.
       
       The AOP ADD command adds the given nickname to the
       AOP list.
       
       The AOP DEL command removes the given nick from the
       AOP list.  If a list of entry numbers is given, those
       entries are deleted.  (See the example for LIST below.)
       
       The AOP LIST command displays the AOP list.  If
       a wildcard mask is given, only those entries matching the
       mask are displayed.  If a list of entry numbers is given,
       only those entries are shown; for example:
      
          AOP #channel LIST 2-5,7-9
             Lists AOP entries numbered 2 through 5 and
             7 through 9.
             
       The AOP CLEAR command clears all entries of the
       AOP list.
       
       The AOP ADD and AOP DEL commands are limited to
       SOPs or above, while the AOP CLEAR command can only
       be used by the channel founder. However, any user on the
       AOP list may use the AOP LIST command.
       
       This command may have been disabled for your channel, and
       in that case you need to use the access list. See 
       %RChanServ HELP ACCESS for information about the access list,
       and %RChanServ HELP SET XOP to know how to toggle between 
       the access list and xOP list systems.
      
      
    • HOP
       Syntax: /msg ChanServ  HOP channel ADD nick
               HOP channel DEL {nick | entry-num | list}
               HOP channel LIST [mask | list]
               HOP channel CLEAR
       
       Maintains the HOP (HalfOP) list for a channel. The HOP 
       list gives users the right to be auto-halfopped on your 
       channel.
       
       The HOP ADD command adds the given nickname to the
       HOP list.
       
       The HOP DEL command removes the given nick from the
       HOP list.  If a list of entry numbers is given, those
       entries are deleted.  (See the example for LIST below.)
       
       The HOP LIST command displays the HOP list.  If
       a wildcard mask is given, only those entries matching the
       mask are displayed.  If a list of entry numbers is given,
       only those entries are shown; for example:
      
          HOP #channel LIST 2-5,7-9
             Lists HOP entries numbered 2 through 5 and
             7 through 9.
             
       The HOP CLEAR command clears all entries of the
       HOP list.
       
       The HOP ADD, HOP DEL and HOP LIST commands are 
       limited to AOPs or above, while the HOP CLEAR command 
       can only be used by the channel founder.
       
       This command may have been disabled for your channel, and
       in that case you need to use the access list. See 
       %RChanServ HELP ACCESS for information about the access list,
       and %RChanServ HELP SET XOP to know how to toggle between 
       the access list and xOP list systems.
      
      
    • SOP
       Syntax: /msg ChanServ  SOP channel ADD nick
               SOP channel DEL {nick | entry-num | list}
               SOP channel LIST [mask | list]
               SOP channel CLEAR
       
       Maintains the SOP (SuperOP) list for a channel. The SOP 
       list gives users all rights given by the AOP list, and adds
       those needed to use the AutoKick and the BadWords lists, 
       to send and read channel memos, and so on.
       
       The SOP ADD command adds the given nickname to the
       SOP list.
       
       The SOP DEL command removes the given nick from the
       SOP list.  If a list of entry numbers is given, those
       entries are deleted.  (See the example for LIST below.)
       
       The SOP LIST command displays the SOP list.  If
       a wildcard mask is given, only those entries matching the
       mask are displayed.  If a list of entry numbers is given,
       only those entries are shown; for example:
      
          SOP #channel LIST 2-5,7-9
             Lists AOP entries numbered 2 through 5 and
             7 through 9.
             
       The SOP CLEAR command clears all entries of the
       SOP list.
       
       The SOP ADD, SOP DEL and SOP CLEAR commands are 
       limited to the channel founder. However, any user on the
       AOP list may use the SOP LIST command.
       
       This command may have been disabled for your channel, and
       in that case you need to use the access list. See 
       %RChanServ HELP ACCESS for information about the access list,
       and %RChanServ HELP SET XOP to know how to toggle between 
       the access list and xOP list systems.
      
      
    • VOP
       Syntax: /msg ChanServ  VOP channel ADD nick
               VOP channel DEL {nick | entry-num | list}
               VOP channel LIST [mask | list]
               VOP channel CLEAR
       
       Maintains the VOP (VOicePeople) list for a channel.  
       The VOP list allows users to be auto-voiced and to voice 
       themselves if they aren't.
       
       The VOP ADD command adds the given nickname to the
       VOP list.
       
       The VOP DEL command removes the given nick from the
       VOP list.  If a list of entry numbers is given, those
       entries are deleted.  (See the example for LIST below.)
       
       The VOP LIST command displays the VOP list.  If
       a wildcard mask is given, only those entries matching the
       mask are displayed.  If a list of entry numbers is given,
       only those entries are shown; for example:
      
          VOP #channel LIST 2-5,7-9
             Lists VOP entries numbered 2 through 5 and
             7 through 9.
             
       The VOP CLEAR command clears all entries of the
       VOP list.
       
       The VOP ADD, VOP DEL and VOP LIST commands are 
       limited to AOPs or above, while the VOP CLEAR command 
       can only be used by the channel founder.
       
       This command may have been disabled for your channel, and
       in that case you need to use the access list. See 
       %RChanServ HELP ACCESS for information about the access list,
       and %RChanServ HELP SET XOP to know how to toggle between 
       the access list and xOP list systems.
      
      
    • ACCESS
       Syntax: /msg ChanServ  ACCESS channel ADD nick level
               ACCESS channel DEL {nick | entry-num | list}
               ACCESS channel LIST [mask | list]
               ACCESS channel CLEAR
       
       Maintains the access list for a channel.  The access
       list specifies which users are allowed chanop status or
       access to ChanServ commands on the channel.  Different
       user levels allow for access to different subsets of
       privileges; %RChanServ HELP ACCESS LEVELS for more
       specific information.  Any nick not on the access list has
       a user level of 0.
       
       The ACCESS ADD command adds the given nickname to the
       access list with the given user level; if the nick is
       already present on the list, its access level is changed to
       the level specified in the command.  The level specified
       must be less than that of the user giving the command, and
       if the nick is already on the access list, the current
       access level of that nick must be less than the access level
       of the user giving the command.
       
       The ACCESS DEL command removes the given nick from the
       access list.  If a list of entry numbers is given, those
       entries are deleted.  (See the example for LIST below.)
       
       The ACCESS LIST command displays the access list.  If
       a wildcard mask is given, only those entries matching the
       mask are displayed.  If a list of entry numbers is given,
       only those entries are shown; for example:
      
          ACCESS #channel LIST 2-5,7-9
             Lists access entries numbered 2 through 5 and
             7 through 9.
             
       The ACCESS CLEAR command clears all entries of the
       access list.
      
      
    • ACCESS LEVELS
       User access levels
       
       By default, the following access levels are defined:
       
          Founder   Full access to ChanServ functions; automatic
                            opping upon entering channel.  Note
                            that only one person may have founder
                            status (it cannot be given using the
                            ACCESS command).
               10   Access to AKICK command; automatic opping.
                5   Automatic opping.
                3   Automatic voicing.
                0   No special privileges; can be opped by other
                            ops (unless secure-ops is set).
               <0   May not be opped.
       
       These levels may be changed, or new ones added, using the
       LEVELS command; type %RChanServ HELP LEVELS for
       information.
      
      
    • AKICK
       Syntax: /msg ChanServ  AKICK channel ADD mask [reason]
               AKICK channel STICK mask
               AKICK channel UNSTICK mask
               AKICK channel DEL mask
               AKICK channel LIST [mask]
               AKICK channel VIEW [mask]
               AKICK channel ENFORCE
               AKICK channel CLEAR
       
       Maintains the AutoKick list for a channel.  If a user
       on the AutoKick list attempts to join the channel,
       ChanServ will ban that user from the channel, then kick
       the user.
       
       The AKICK ADD command adds the given nick or usermask
       to the AutoKick list.  If a reason is given with
       the command, that reason will be used when the user is
       kicked; if not, the default reason is "You have been
       banned from the channel".
       
       The AKICK STICK command permanently bans the given mask 
       on the channel. If someone tries to remove the ban, ChanServ
       will automatically set it again. You can't use it for
       registered nicks.
       
       The AKICK UNSTICK command cancels the effect of the
       AKICK STICK command, so you'll be able to unset the
       ban again on the channel.
       
       The AKICK DEL command removes the given nick or mask
       from the AutoKick list.  It does not, however, remove any
       bans placed by an AutoKick; those must be removed
       manually.
       
       The AKICK LIST command displays the AutoKick list, or
       optionally only those AutoKick entries which match the
       given mask.
       
       The AKICK VIEW command is a more verbose version of
       AKICK LIST command.
       
       The AKICK ENFORCE command causes ChanServ to enforce the
       current AKICK list by removing those users who match an
       AKICK mask.
       
       The AKICK CLEAR command clears all entries of the
       akick list.
      
      
    • LEVELS
       Syntax: /msg ChanServ  LEVELS channel SET type level
               LEVELS channel {DIS | DISABLE} type
               LEVELS channel LIST
               LEVELS channel RESET
       
       The LEVELS command allows fine control over the meaning of
       the numeric access levels used for channels.  With this
       command, you can define the access level required for most
       of ChanServ's functions.  (The SET FOUNDER and SET PASSWORD
       commands, as well as this command, are always restricted to
       the channel founder.)
       
       LEVELS SET allows the access level for a function or group of
       functions to be changed.  LEVELS DISABLE (or DIS for short)
       disables an automatic feature or disallows access to a
       function by anyone other than the channel founder.
       LEVELS LIST shows the current levels for each function or
       group of functions.  LEVELS RESET resets the levels to the
       default levels of a newly-created channel (see
       HELP ACCESS LEVELS).
       
       For a list of the features and functions whose levels can be
       set, see HELP LEVELS DESC.
      
      
    • INFO
       Syntax: /msg ChanServ  INFO channel [ALL]
       
       Lists information about the named registered channel,
       including its founder, time of registration, last time
       used, description, and mode lock, if any. If ALL is 
       specified, the entry message and successor will also 
       be displayed.
       
       By default, the ALL option is limited to those with
       founder access on the channel.
      
      
    • LIST
       Syntax: /msg ChanServ  LIST pattern
       
       Lists all registered channels matching the given pattern.
       (Channels with the PRIVATE option set are not listed.)
      
      
    • OP
       Syntax: /msg ChanServ  OP [#channel [nick]]
       
       Ops a selected nick on a channel. If nick is not given,
       it will op you. If channel and nick are not given,
       it will op you on all channels you're on, provided you
       have the rights to.
       
       By default, limited to AOPs or those with level 5 access 
       and above on the channel.
      
      
    • DEOP
       Syntax: /msg ChanServ  DEOP [#channel [nick]]
       
       Deops a selected nick on a channel. If nick is not given,
       it will deop you. If channel and nick are not given,
       it will deop you on all channels you're on, provided you
       have the rights to.
       
       By default, limited to AOPs or those with level 5 access 
       and above on the channel.
       
      
    • VOICE
       Syntax: /msg ChanServ  VOICE [#channel [nick]]
       
       Voices a selected nick on a channel. If nick is not given,
       it will voice you. If channel and nick are not given,
       it will voice you on all channels you're on, provided you
       have the rights to.
       
       By default, limited to AOPs or those with level 5 access 
       and above on the channel, or to VOPs or those with level 3 
       and above for self voicing.
      
      
    • DEVOICE
       Syntax: /msg ChanServ  DEVOICE [#channel [nick]]
       
       Devoices a selected nick on a channel. If nick is not given,
       it will devoice you. If channel and nick are not given,
       it will devoice you on all channels you're on, provided you
       have the rights to.
       
       By default, limited to AOPs or those with level 5 access 
       and above on the channel, or to VOPs or those with level 3 
       and above for self devoicing.
       
      
    • HALFOP
       Syntax: /msg ChanServ  HALFOP [#channel [nick]]
       
       Halfops a selected nick on a channel. If nick is not given,
       it will halfop you. If channel and nick are not given,
       it will halfop you on all channels you're on, provided you
       have the rights to.
       
       By default, limited to AOPs and those with level 5 access 
       and above on the channel, or to HOPs or those with level 4 
       and above for self halfopping.
      
      
    • DEHALFOP
       Syntax: /msg ChanServ  DEHALFOP [#channel [nick]]
       
       Dehalfops a selected nick on a channel. If nick is not given,
       it will dehalfop you. If channel and nick are not given,
       it will dehalfop you on all channels you're on, provided you
       have the rights to.
       
       By default, limited to AOPs and those with level 5 access 
       and above on the channel, or to HOPs or those with level 4 
       and above for self dehalfopping.
       
      
    • PROTECT
       Syntax: /msg ChanServ  PROTECT [#channel [nick]]
       
       Protects a selected nick on a channel. If nick is not given,
       it will protect you. If channel and nick are not given,
       it will protect you on all channels you're on, provided you
       have the rights to.
       
       By default, limited to the founder, or to SOPs or those with 
       level 10 and above on the channel for self protecting.
      
      
    • DEPROTECT
       Syntax: /msg ChanServ  DEPROTECT [#channel [nick]]
       
       Deprotects a selected nick on a channel. If nick is not given,
       it will deprotect you. If channel and nick are not given,
       it will deprotect you on all channels you're on, provided you
       have the rights to.
       
       By default, limited to the founder, or to SOPs or those with 
       level 10 and above on the channel for self deprotecting.
      
      
    • OWNER
       Syntax: /msg ChanServ  OWNER [#channel]
       
       Gives you owner status on channel. If channel is not 
       given, it will give you owner status on all channels you're 
       on, provided you have the rights to.
       
       Limited to those with founder access on the channel.
      
      
    • DEOWNER
       Syntax: /msg ChanServ  DEOWNER [#channel]
       
       Removes your owner status on channel. If channel is 
       not given, it will remove your owner status on all channels 
       you're on, provided you have the rights to.
       
       Limited to those with founder access on the channel.
      
      
    • INVITE
       Syntax: /msg ChanServ  INVITE channel
       
       Tells ChanServ to invite you into the given channel.  
       
       By default, limited to AOPs or those with level 5 and above
       on the channel.
      
      
    • UNBAN
       Syntax: /msg ChanServ  UNBAN channel
       
       Tells ChanServ to remove all bans preventing you from
       entering the given channel.  
       
       By default, limited to AOPs or those with level 5 and above
       on the channel.
       
      
    • KICK
       Syntax: /msg ChanServ  KICK [#channel [nick [reason]]]
       
       Kicks a selected nick on a channel. If nick is not given,
       it will kick you. If channel and nick are not given,
       it will kick you on all channels you're on, provided you
       have the rights to.
       
       By default, limited to AOPs or those with level 5 access 
       and above on the channel.
      
      
    • BAN
       Syntax: /msg ChanServ  BAN [#channel [nick [reason]]]
       
       Bans a selected nick on a channel. If nick is not given,
       it will ban you. If channel and nick are not given,
       it will ban you on all channels you're on, provided you
       have the rights to.
       
       By default, limited to AOPs or those with level 5 access 
       and above on the channel.
      
      
    • TOPIC
       Syntax: /msg ChanServ  TOPIC channel [topic]
       
       Causes ChanServ to set the channel topic to the one
       specified. If topic is not given, then an empty topic
       is set. This command is most useful in conjunction
       with SET TOPICLOCK. See %RChanServ HELP SET TOPICLOCK
       for more information.
       
       By default, limited to those with founder access on the
       channel. 
      
      
    • CLEAR
       Syntax: /msg ChanServ  CLEAR channel what
       
       Tells ChanServ to clear certain settings on a channel.  what
       can be any of the following:
       
            MODES    Resets all modes on the channel (i.e. clears
                         modes i,k,l,m,n,p,s,t).
            BANS     Clears all bans on the channel.
            EXCEPTS  Clears all excepts on the channel.
            OPS      Removes channel-operator status (mode +o) from
                         all channel operators.
            HOPS     Removes channel-halfoperator status (mode +h) from
                         all channel halfoperators, if supported.
            VOICES   Removes "voice" status (mode +v) from anyone
                         with that mode set.
            USERS    Removes (kicks) all users from the channel.
       
       By default, limited to those with founder access on the
       channel.
       
      
    • GETKEY
       Syntax: /msg ChanServ  GETKEY channel
       
       Returns the key of the given channel. This is a command
       mainly intended to be used by bots and/or scripts, so
       the output is in the following way:
       
       KEY <channel> <key>
       
       key is "NO KEY" if no key is set.
       
      
    • SENDPASS
       Syntax: /msg ChanServ  SENDPASS channel
       
       Send the password of the given channel to the e-mail address
       set in the founder's nickname record. This command is really 
       useful to deal with lost passwords.
       
       May be limited to IRC operators on certain networks.
       
       This command is unavailable when encryption is enabled.
      
      
    • SERVADMIN HELP
        
       Services admins can also drop any channel without needing
       to identify via password, and may view the access, AKICK,
       and level setting lists for any channel.
       
      
    • SERVADMIN LOGOUT
       Syntax: /msg ChanServ  LOGOUT channel [nickname]
       
       This command will log the selected nickname out meaning they 
       would have to reidentify themselves to regain their access.
       
       If you are the founder of the channel, you can log out anybody,
       else you can only log out yourself.
       
       If you are a Services admin, you can log out 
       anybody of any channel without having to be the founder
       of the channel. Also, you can omit the nickname parameter;
       this will log out all identified users from the channel.
      
      
    • SERVADMIN DROP
       Syntax: /msg ChanServ  DROP channel
       
       Unregisters the named channel.  Only Services admins
       can drop a channel for which they have not identified.
      
      
    • SERVADMIN SET
       
       Services admins can also set the option NOEXPIRE, with
       which channels can be prevented from expiring.
       Additionally, Services admins can set options for any
       channel without identifying by password for the channel.
      
      
    • SERVADMIN SET NOEXPIRE
       Syntax: /msg ChanServ  SET channel NOEXPIRE {ON | OFF}
       
       Sets whether the given channel will expire.  Setting this
       to ON prevents the channel from expiring.
       
       Limited to Services admins.
      
      
    • SERVADMIN INFO
       
       Services admins can use the ALL parameter with any channel.
      
      
    • SERVADMIN LIST
       Syntax: /msg ChanServ  LIST pattern [FORBIDDEN] [SUSPENDED] [NOEXPIRE]
       
       Lists all registered channels matching the given pattern.
       Channels with the PRIVATE option set will only be displayed
       to Services admins. Channels with the NOEXPIRE option set 
       will have a ! appended to the channel name for Services admins.
       
       If the FORBIDDEN, SUSPENDED or NOEXPIRE options are given, only 
       channels which, respectively, are FORBIDden, SUSPENDed or have 
       the NOEXPIRE flag set will be displayed.  If both options are 
       given, both types of channels will be displayed. These options are 
       limited to Services admins.
      
      
    • SERVADMIN GETPASS
       Syntax: /msg ChanServ  GETPASS channel
       
       Returns the password for the given channel.  Note that
       whenever this command is used, a message including the
       person who issued the command and the channel it was used
       on will be logged and sent out as a WALLOPS/GLOBOPS.
       
       Limited to Services admins.
      
      
    • SERVADMIN FORBID
       Syntax: /msg ChanServ  FORBID channel [reason]
       
       Disallows anyone from registering or using the given
       channel.  May be cancelled by dropping the channel.
       
       Reason may be required on certain networks.
       
       Limited to Services admins.
      
      
    • SERVADMIN SUSPEND
       Syntax: /msg ChanServ  SUSPEND channel [reason]
       
       Disallows anyone from registering or using the given
       channel.  May be cancelled by using the UNSUSPEND
       command to preserve all previous channel data/settings.
       
       Reason may be required on certain networks.
       
       Limited to Services admins.
      
      
    • SERVADMIN UNSUSPEND
       Syntax: /msg ChanServ  UNSUSPEND channel
       
       Releases a suspended channel. All data and settings
       are preserved from before the suspension.
       
       Limited to Services admins.
      
      
    • SERVADMIN STATUS
       Syntax: /msg ChanServ  STATUS channel nickname
       
       Returns the current access level of the given nick on the
       given channel.  The reply is of the form:
       
           STATUS channel nickname access-level
       
       If an error occurs, the reply will be in the form:
       
           STATUS ERROR error-message
       
       Limited to Services admins.
      
      
      
    catalan . german . english . spanish . french . greek . hungarian . italian . dutch . polish . portuguese . russian . turkish
Generated by Anope docgen.pl 2.2

Docgen Output Tarball

Valid XHTML 1.0!