Anope 1.7.15.1156 - BotServ
    catalan . german . english . spanish . french . greek . hungarian . italian . dutch . polish . portuguese . russian . turkish

    | NickServ | ChanServ | OperServ | MemoServ | HostServ | BotServ |

    • HELP
       BotServ allows you to have a bot on your own channel.
       It has been created for users that can't host or
       configure a bot, or for use on networks that don't
       allow users' bot. Available commands are listed 
       below; to use them, type %RBotServ command.  For 
       more information on a specific command, type %R
       BotServ HELP command.
       
      
      
    • BOTLIST
       Syntax: /msg BotServ  BOTLIST
       
       Lists all available bots on this network.
       
      
    • ASSIGN
       Syntax: /msg BotServ  ASSIGN chan nick
       
       Assigns a bot pointed out by nick to the channel chan. You
       can then configure the bot for the channel so it fits
       your needs.  
       
      
    • UNASSIGN
       Syntax: /msg BotServ  UNASSIGN chan
       
       Unassigns a bot from a channel. When you use this command,
       the bot won't join the channel anymore. However, bot
       configuration for the channel is kept, so you will always
       be able to reassign a bot later without have to reconfigure
       it entirely.
       
      
    • INFO
       Syntax: /msg BotServ  INFO {chan | nick}
       
       Allows you to see BotServ information about a channel or a bot.
       If the parameter is a channel, then you'll get information
       such as enabled kickers. If the parameter is a nick,
       you'll get information about a bot, such as creation
       time or number of channels it is on.
       
      
    • SET
       Syntax: /msg BotServ  SET channel option parameters
       
       Configures bot options.  option can be one of:
       
           DONTKICKOPS      To protect ops against bot kicks
           DONTKICKVOICES   To protect voices against bot kicks
           GREET            Enable greet messages
           FANTASY          Enable fantaisist commands
           SYMBIOSIS        Allow the bot to act as a real bot
       
       Type %RBotServ HELP SET option for more information
       on a specific option.
      
       Note: access to this command is controlled by the
       level SET.
       
      
    • SET DONTKICKOPS
       Syntax: /msg BotServ  SET channel DONTKICKOPS {ON|OFF}
       
       Enables or disables ops protection mode on a channel.
       When it is enabled, ops won't be kicked by the bot
       even if they don't match the NOKICK level.
       
      
    • SET DONTKICKVOICES
       Syntax: /msg BotServ  SET channel DONTKICKVOICES {ON|OFF}
       
       Enables or disables voices protection mode on a channel.
       When it is enabled, voices won't be kicked by the bot
       even if they don't match the NOKICK level.
       
      
    • SET FANTASY
       Syntax: /msg BotServ  SET channel FANTASY {ON|OFF}
      
       Enables or disables fantasy mode on a channel.
       When it is enabled, users will be able to use
       commands !op, !deop, !voice, !devoice,
       !kick, !kb, !unban, !seen on a channel (find how 
       to use them; try with or without nick for each, 
       and with a reason for some?).
       
       Note that users wanting to use fantaisist
       commands MUST have enough level for both
       the FANTASIA and another level depending
       of the command if required (for example, to use 
       !op, user must have enough access for the OPDEOP
       level).
      
      
    • SET GREET
       Syntax: /msg BotServ  SET channel GREET {ON|OFF}
       
       Enables or disables greet mode on a channel.
       When it is enabled, the bot will display greet
       messages of users joining the channel, provided
       they have enough access to the channel.
      
      
    • SET SYMBIOSIS
       Syntax: /msg BotServ  SET channel SYMBIOSIS {ON|OFF}
       
       Enables or disables symbiosis mode on a channel.
       When it is enabled, the bot will do everything
       normally done by BotServ on channels, such as MODEs,
       KICKs, and even the entry message.
      
      
    • KICK
       Syntax: /msg BotServ  KICK channel option parameters
       
       Configures bot kickers.  option can be one of:
       
           BOLDS         Sets if the bot kicks bolds
           BADWORDS      Sets if the bot kicks bad words
           CAPS          Sets if the bot kicks caps
           COLORS        Sets if the bot kicks colors
           FLOOD         Sets if the bot kicks flooding users
           REPEAT        Sets if the bot kicks users who repeat
                              themselves
           REVERSES      Sets if the bot kicks reverses
           UNDERLINES    Sets if the bot kicks underlines
       
       Type %RBotServ HELP KICK option for more information
       on a specific option.
       
       Note: access to this command is controlled by the
       level SET.
      
      
    • KICK BOLDS
       Syntax: /msg BotServ  KICK channel BOLDS {ON|OFF} [ttb]
      
       Sets the bolds kicker on or off. When enabled, this
       option tells the bot to kick users who use bolds.
      
       ttb is the number of times an user can be kicked
       before it get banned. Don't give ttb to disable
       the ban system once activated.
      
      
    • KICK COLORS
       Syntax: /msg BotServ  KICK channel COLORS {ON|OFF} [ttb]
      
       Sets the colors kicker on or off. When enabled, this
       option tells the bot to kick users who use colors.
      
       ttb is the number of times an user can be kicked
       before it get banned. Don't give ttb to disable
       the ban system once activated.
      
      
    • KICK REVERSES
       Syntax: /msg BotServ  KICK channel REVERSES {ON|OFF} [ttb]
      
       Sets the reverses kicker on or off. When enabled, this
       option tells the bot to kick users who use reverses.
      
       ttb is the number of times an user can be kicked
       before it get banned. Don't give ttb to disable
       the ban system once activated.
      
      
    • KICK UNDERLINES
       Syntax: /msg BotServ  KICK channel UNDERLINES {ON|OFF} [ttb]
      
       Sets the underlines kicker on or off. When enabled, this
       option tells the bot to kick users who use underlines.
      
       ttb is the number of times an user can be kicked
       before it get banned. Don't give ttb to disable
       the ban system once activated.
      
      
    • KICK CAPS
       Syntax: /msg BotServ  KICK channel CAPS {ON|OFF} [ttb [min [percent]]]
      
       Sets the caps kicker on or off. When enabled, this
       option tells the bot to kick users who are talking in
       CAPS.
      
       The bot kicks only if there are at least min caps
       and they constitute at least percent%% of the total 
       text line (if not given, it defaults to 10 characters
       and 25%%).
      
       ttb is the number of times an user can be kicked
       before it get banned. Don't give ttb to disable
       the ban system once activated.
      
      
    • KICK FLOOD
       Syntax: /msg BotServ  KICK channel FLOOD {ON|OFF} [ttb [ln [secs]]]
      
       Sets the flood kicker on or off. When enabled, this
       option tells the bot to kick users who are flooding
       the channel using at least ln lines in secs seconds
       (if not given, it defaults to 6 lines in 10 seconds).
       
       ttb is the number of times an user can be kicked
       before it get banned. Don't give ttb to disable
       the ban system once activated.
      
      
    • KICK REPEAT
       Syntax: /msg BotServ  KICK #channel REPEAT {ON|OFF} [ttb [num]]
      
       Sets the repeat kicker on or off. When enabled, this
       option tells the bot to kick users who are repeating
       themselves num times (if num is not given, it
       defaults to 3).
      
       ttb is the number of times an user can be kicked
       before it get banned. Don't give ttb to disable
       the ban system once activated.
      
      
    • KICK BADWORDS
       Syntax: /msg BotServ  KICK #channel BADWORDS {ON|OFF} [ttb]
      
       Sets the bad words kicker on or off. When enabled, this
       option tells the bot to kick users who say certain words
       on the channels.
      
       You can define bad words for your channel using the
       BADWORDS command. Type %RBotServ HELP BADWORDS for
       more information.
      
       ttb is the number of times an user can be kicked
       before it get banned. Don't give ttb to disable
       the ban system once activated.
       
      
    • BADWORDS
       Syntax: /msg BotServ  BADWORDS channel ADD word [SINGLE | START | END]
               BADWORDS channel DEL {word | entry-num | list}
               BADWORDS channel LIST [mask | list]
               BADWORDS channel CLEAR
       
       Maintains the bad words list for a channel. The bad
       words list determines which words are to be kicked
       when the bad words kicker is enabled. For more information,
       type %RBotServ HELP KICK BADWORDS.
       
       The BADWORDS ADD command adds the given word to the
       badword list. If SINGLE is specified, a kick will be
       done only if an user says the entire word. If START is 
       specified, a kick will be done if an user says a word
       that starts with word. If END is specified, a kick
       will be done if an user says a word that ends with
       word. If you don't specify anything, a kick will
       be issued every time word is said by an user.
       
       The BADWORDS DEL command removes the given word from the
       bad words list.  If a list of entry numbers is given, those
       entries are deleted.  (See the example for LIST below.)
       
       The BADWORDS LIST command displays the bad words list.  If
       a wildcard mask is given, only those entries matching the
       mask are displayed.  If a list of entry numbers is given,
       only those entries are shown; for example:
      
          BADWORDS #channel LIST 2-5,7-9
             Lists bad words entries numbered 2 through 5 and
             7 through 9.
             
       The BADWORDS CLEAR command clears all entries of the
       bad words list.
      
      
    • SAY
       Syntax: /msg BotServ  SAY channel text
       
       Makes the bot say the given text on the given channel.
      
      
    • ACT
       Syntax: /msg BotServ  ACT channel text
       
       Makes the bot do the equivalent of a "/me" command
       on the given channel using the given text.
      
      
      
    • SERVADMIN BOT
       Syntax: /msg BotServ  BOT ADD nick user host real
               BOT CHANGE oldnick newnick [user [host [real]]]
               BOT DEL nick
       
       Allows Services admins to create, modify, and delete
       bots that users will be able to use on their own
       channels.
       
       BOT ADD adds a bot with the given nickname, username,
       hostname and realname. Since no integrity checks are done 
       for these settings, be really careful.
       BOT CHANGE allows to change nickname, username, hostname
       or realname of a bot without actually delete it (and all
       the data associated with it).
       BOT DEL removes the given bot from the bot list.  
       
       Note: you cannot create a bot that has a nick that is
       currently registered. If an unregistered user is currently
       using the nick, they will be killed.
      
      
    • SERVADMIN SET
       
       These options are reserved to Services admins:
       
           NOBOT            Prevent a bot from being assigned to 
                               a channel
           PRIVATE          Prevent a bot from being assigned by
                               non IRC operators
      
      
    • SERVADMIN SET NOBOT
       Syntax: /msg BotServ  SET channel NOBOT {ON|OFF}
       
       This option makes a channel be unassignable. If a bot 
       is already assigned to the channel, it is unassigned
       automatically when you enable the option.
       
       Limited to Services admins.
      
      
    • SERVADMIN SET PRIVATE
       Syntax: /msg BotServ  SET bot-nick PRIVATE {ON|OFF}
      
       This option prevents a bot from being assigned to a
       channel by users that aren't IRC operators.
      
       Limited to Services admins.
      
      
    catalan . german . english . spanish . french . greek . hungarian . italian . dutch . polish . portuguese . russian . turkish
Generated by Anope docgen.pl 2.2

Docgen Output Tarball

Valid XHTML 1.0!